Kymco Agility 50 - Owner's Manual > How to stop riding

While go near the parking place

Turn on the turn signal light in advance. Watch out vehicles coming behind or aside and stop the motorcycle to the right side slowly.

Restore the throttle grip to closed position and apply the front(brake) level and rear brake pedal as soon as possible.

At this moment, the stoplight will come on to warn the vehicles coming behind.

While the motorcycle is completely stopped

Return the turn signal switch to its original position.

Turn the ignition switch key to the "OFF" position to stop the engine.

CAUTION:

During riding, never operate the ignition switch key.

When the ignition switch key is turned to the"OFF" position, the electric system does not work. Turn off the ignition switch key after the motorcycle is fully stopped.

Parking

Place the motorcycle on its main stand on level ground and do not hinder the traffic.

Stand on the left side and grip the handlebar straight with left hand and the side rod or rear carrier with right hand.

Then, step down the main stand evenly with right foot and pull the motorcycle backward by force with right hand.

CAUTION:

The motorcycle may easily fall down if it is parked on an uneven ground.

Handlebar

After parking, be sure to lock the steering handlebar and take out the key to prevent pilferage. (Refer to P5.)

CAUTION:

Don't park your motorcycle at a place to hinder the traffic.

Park the motorcycle at a safe place and be sure to take out the key to prevent pilferage.

See also: