BMW R 1250 RT - Owner's Manual > Ignition switch/steering lock

Operation / Ignition switch/steering lock

Keys

You receive 2 ignition keys.

Consult the information on the electronic immobiliser (EWS) if a key is lost or mislaid.

One-key system

Lock the handlebars

Lock the handlebars

Switching on ignition

Switching on ignition

Welcome lights

Switching off ignition

Switching off ignition

Electronic immobiliser EWS

The electronic design of the motorcycle allows it to access data stored in the ignition key by means of a ring antenna located in the ignition switch/steering lock. The engine control unit will not permit the engine to be started unless the key is identified as "authorised".

NOTICE A spare key attached to the same ring as the ignition key used to start the engine could "irritate" the electronics, in which case the enabling signal for starting is not issued. The warning is displayed on the multifunction display with the key symbol.

Always keep the spare key separately from the ignition key.

If you lose a key, you can have it barred by your authorised BMW Motorrad dealer.

If you wish to do this, you will need to bring all other keys for the motorcycle with you. The engine cannot be started by a barred key, but a key that has been barred can subsequently be reactivated.

You can obtain extra keys only through an authorised BMW Motorrad dealer. The keys are part of an integrated security system, so the dealer is under an obligation to check the legitimacy of all applications for replacement/extra keys.

See also:

 BMW R 1250 RT - Owner's Manual > Operation

 BMW R 1250 RT - Owner's Manual > Ignition with Keyless Ride

- with Keyless Ride OE Keys NOTICE The telltale light for the radio-operated key flashes while the search for the radio-operated key is in progress.

Owner's Manuals

Service manuals

Workshop Manuals