Kymco Agility 50 - Owner's Manual > Start with the kick lever

1. Place the motorcycle on its main stand on level ground.
2. Depress the kick lever with force.

When the engine is cold and does not start after the kick lever is depressed for 3-4 times, rotate the throttle grip for 1/8-1/4 turn to facilitate starting.

Warm up the engine for a little while (about 2-3 minutes) after cold start.

After the engine is started, do not accelerate suddenly and keep riding at low speed to prolong the engine service life.

CAUTION:

After the engine is started, the kick lever must be returned to its original position.

The exhaust contains poisonous carbon monoxide which is harmful to human body. Never run the engine in a closed area.

Turn off all light switches before starting the motorcycle.

Normal riding method

Starting the engine

Start the engine by referring to the starting methods specified in Section 5.

CAUTION:

Keep your finger away from the button immediately after the engine is started to avoid engine damage.

The rear brake pedal should be kept at the braking position before riding.

Rebound the main stand

Keep the rear brake pedal at braking position and push the motorcycle forward, then the main stand will rebound automatically.

CAUTION:

After starting the engine and before moving, do not turn the throttle grip to increase the engine rpm.

See also: