mopedscooter.net

Peugeot Speedfight - Workshop Manual > Service Operations

Service Operations

See also:

 Peugeot Speedfight - Workshop Manual > Removal of the rear cover assembly and mudflap

Procedure 2. Remove the storage compartment. See: Procedure 1. Remove the lower fairing by sliding it towards the rear of the vehicle. 1 screw Ø6 mm. Remove the rear cover assembly (10 screw). 6 plastic screws (A). 2 screw Ø5 mm (B). 2 screw Ø6 mm (C). Disconnect the taillight. Remove the splash guard. 4 plastic screws. Remove the taillight. 4 plastic screws. Separate the 2 fairings (1). 2 plastic screws.

 Peugeot Speedfight - Workshop Manual > Changing the engine oil

  The engine must be drained when it is warm to allow the oil to run easier. Put on protective gloves. Place the vehicle on its central stand on flat ground. Remove the engine's oil filler cap (1). Remove the drainage cap and its seal (2) and allow the oil to drip into a recipient. Remove the strainer cap (3) and clean the strainer. Re-install the filter cap fitted with a new seal.

Owner's Manuals

Service manuals

Workshop Manuals